Hot Work Steel, SUPREME is characterized by: High level of resistance to thermal shock and thermal fatigue Good high temperature strength Excellent. Hot Work Steel, ASSAB is a chromium-molybdenum-vanadium-alloyed steel which is characterized by: Good resistance to abrasion at both low and high . ASSAB’s tooling solutions for such exacting demands are several: QRO 90 Supreme, Unimax, Dievar and ASSAB Supreme. They all offer predictable tool.

Click here to view all the property values for this datasheet as they were originally entered into MatWeb. These improved isotropic properties are particularly valuable for tooling subjected to high mechanical and thermal fatigue stresses, e.

Tensile Strength, Ultimate, R m. High level of resistance to thermal shock and thermal fatigue Good high-temperature strength Excellent toughness and ductility in all directions Good machinability and polishability Excellent through-hardening properties Good dimensional stability during hardening Improved tooling performance The name “Supreme” implies that by special processing techniques and close control, the steel attains high purity and a very fine structure.

Hot Stamping

Vidar 1 ESR is a product suitable for both hot work and plastic mould applications, especially large plastic moulds that require good toughness in combination with high surface finish obtained by polishing or texturing. Elmax SuperClean is a powder mould steel characterized by a combination of very good wear resistance, corrosion resistance and dimensional stability. It has a unique combination of toughness, corrosion resistance and through-hardening properties.

Dies, backers, die holders, liners, dummy blocks, stems. Stavax ESR is electro slag remelted in order to further reduce the number of inclusions in the steel. It is also a very good steel for all types of surface treatments.

This product is suitable for coating and nitriding. ASSAB is a corrosion resistant mould steel with high wear resistance and good polishability.

Assab Steels 2M Hot Work Steel

POLMAX Polmax is a through hardening corrosion resistant mould steel with a superior polishability, good corrosion resistance and machinability. Further, Supreme shows significant improvements in isotropic properties compared to conventionally produced AISI H 13 grades. Desirable properties for quality plastic moulds include high polishability, high corrosion resistance, wear resistance, cracking resistance and high thermal conductivity.

Tensile Strength at Break, R m. Corrax is a precipitation hardening steel with superior corrosion resistance and easy to heat treat. Create Your Free Account. General Supreme is a chromium-molybdenum-vanadium-alloyed tool steel which is characterized by: RoyAlloy is a patented free machining stainless holder steel, which is supplied in prehardened condition.

Tensile Strength, Yield, R p MatWeb is intended for personal, non-commercial use.

This has been supplemented by hot stamping, the new game-changing process which places new demands on the tool steel used in the process.

However, UL assumes no responsibility or liability for the accuracy of the information contained on this website and strongly encourages that upon final product or material selection information is validated with the manufacturer. Excellent through-hardening properties Very limited distortion during hardening.

UNIMAX Unimax is a high hardness electroslag remelted tool steel which provides great wear resistance even over extended time at elevated temperatures.

RoyAlloy is designed specifically for plastic moulding applications aiming at providing reduced mould maintenance costs, worry free weld repair, dimensional stability and lower mould production costs. This product is used both as mould material and engineering material.

The information presented here was acquired by UL from the producer of the product or material or original information provider. High level of toughness and ductility Uniform and high level of machinability and polishability Good high-temperature strength and resistance to thermal fatigue. Notes 1 Typical properties: Vanadis 4 Extra SuperClean is powder tool steel for long run tooling.

Tensile Strength, Ultimate, R m. Please contact us at webmaster matweb. ASSAB is a chromium-molybdenum-vanadium-alloyed steel which is characterized by: Mirrax ESR is a through hardening corrosion resistant aseab with very good 8047.

Injection Moulding

We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding error. Good machinability and corrosion resistance reduces tool manufacturing and maintenance costs. When used in steel mould it effectively cools hot spots, reducing xssab eliminating the need for cooling channels.

VIDAR 1 ESR Vidar 1 ESR is a product suitable for both hot work and plastic mould applications, especially large plastic moulds that require good toughness in combination with high surface finish obtained by polishing or texturing. Corrax provides good dimensional stability.

Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units. Soaking time 30 minutes. Tools for pressing Aluminum, magnesium, copper alloys, and steel. CALDIE Caldie is a medium alloyed tool steel suitable for short and medium run tooling in applications where a combination of very high chipping resistance and compressive strength is required. Click here to view all the property values for this datasheet as they were originally entered into MatWeb.

This grade is produced through conventional production method and for superior polishability we recommend other products in our Stainless Concept series. Product Description General Supreme is a chromium-molybdenum-vanadium-alloyed tool steel which is characterized by: We also ask that you refer to MatWeb’s terms of use regarding this information.

Nimax is a low carbon assabb with excellent toughness, machinability and weldability. Soaking time 45 minutes.