USING PARAFFIN COATED SPECIMENS. LS R ASTM D - 07( ). Page 2 of 2. Cold in-place recycled and cold in-place with expanded asphalt. Buy ASTM D R TEST METHOD FOR BULK SPECIFIC GRAVITY AND DENSITY OF COMPACTED BITUMINOUS MIXTURES. Purchase your copy of ASTM D - 07() as a PDF download or hard copy directly from the official BSI Shop. All BSI British Standards.

Current edition approved July 1, Store specimens in a safe, cool place. A number in parentheses indicates the year of last reapproval. Originally approved in There should be a minimum of 15 m approximately 0.

This standard is issued under the fixed designation D; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision.

Individual reprints single or multiple copies of this standard may be obtained by contacting ASTM at the above address or at phonefaxor service astm. A constant mass is defined as less than a 0.

ASTM D1188 - 07 (15) - Bulk Specific Gravity and Density of Compacted Bituminous…

The mass of d11888 moisture, Emoist is:. No further reproductions authorized. It shall be equipped with a suitable apparatus to permit weighing the specimen while it is suspended in water. If you feel that your comments have not received a fair hearing you should make your views known to the Zstm Committee on Standards, at the address shown below.

Grasp the film at the ends and stretch out to about m 16 in.

ASTM Volume Take care not to damage the sample. Designate this mass as E.

Your comments will receive careful consideration at a meeting of the responsible technical committee, which you may attend. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Additionally, a minimum of one foam pad with a size approximately equal to the top surface dimensions of the sample shall be on hand. The specific gravity is:. Asmt mass of the moisture is then subtracted from any determination of mass in the following sections.

Designate this oven-dry mass as Edry. Field samples should be obtained in accordance with Practice D Juliano row Enviado por: Since specific gravity has no units, it must be converted to density when this type of measurement is required.

Pavement specimens shall be taken from pavements with a core drill, diamond, or carborundrum saw, or other suitable means, in accordance with Practice D Users of this standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, are entirely their own responsibility.

ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentioned in this standard. Your comments are invited either for revision of this standard or for additional standards and should be addressed to ASTM International Headquarters. Designate this mass as D. This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years and if not revised, either reapproved or withdrawn.

Designate this as mass A. Parte 1 de 2. When any of these materials are visually evident, they shall be removed in accordance with 6.

CM - 12 - Microscopical Determination of This conversion is made by multiplying the specific gravity at a given temperature by the density of water at the same temperature. Use another specimen of the same size to press down on top of the foam.

A superscript epsilon indicates an editorial change since the aetm revision or reapproval.

ASTM D - 07 (15) - Bulk Specific Gravity and Density of Compacted Bituminous

The balance shall conform to Specification D as a class GP2 balance. For example, a sensitivity of 0.

This will eliminate the air pockets from both surfaces. Take care not to create holes in the film.