ASTM D - Standard Test Methods for Testing Fiber Ropes. HEED THIS NOTICE: Criminal penalties may apply for noncompliance. e. Document Name: ASTM D Standard Test Method for Testing Fiber Ropes. By Authority Of THE UNITED STATES OF AMERICA Legally Binding Document By the Authority Vested By Part 5 of the United States Code § (a) and Part 1.

We need your help to maintenance this website. We are a non-profit group that run this website to share documents.

astm.d4268.1993

Precision and Bias 3S. It is anticipated ‘that the intedaborat.

A number in parentheses indicates the year oflast reapproval. Ropes from different stages of the winding process are usually taken and tested so as to reduce the amount of potential scrap material and ensure the proper quality. There are several elongation calculations which can be found in the official publication: The values provided in parentheses are provided astj information purposes only.

Originally published as D - Standard samples for ropes can vary between different manufacturers. Maribel Bonite Peneyra Category: It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Ropes are really just a series of individual fibers which are wound or braided to create larger strands and eventually, a rope or cord.

Please fill this form, we will try to respond as soon as possible. Ultimate Tensile Strength UTS can also be transcribed if the max force is larger than the breaking force. The wrap drum spreads the tensile stress over a wider area which helps with procedural consistency and better simulates actual working d468.

A tensile test is one of the simplest ways of testing a rope’s performance and quality. Elongation is d4628 important and the modulus of elasticity can also be derived from this data as well. D - 93 Standard Test Methods for Testing Fiber Ropes 1 This standard is issued under the fixed designation D ; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year oflast revision.

Size px x x x c4268 Please copy and paste this embed script to where you want to embed Embed Script. The cross-sectional area is the most important factor.

Criminal penalties may apply for noncompliance. ASTM D specifies a method for testing fiber based ropes. Last previous edition D - Thank you for interesting in our services. These types of materials are used in the transportation industry in order to secure cargo. The amount of times the cord must be wrapped depends on the coefficient of ashm of the rope. Wrap grips are the best solution for ropes tensile testing because they reduce the propensity ast the cord to slip during the pull.

astm.d - Free Download PDF

Apply the pFescribed numbet of tensioning cycles continuously. Breaking force is the force at which the rope breaks. Please help us to share our service with your friends.

If the rope is made of nylon or a similar type of material, it will probably need to be wrapped several times. Ropes are also used for sports such as mountain climbing. We need your help! It can be expected that strength loss will occur dependi,ng llgation. Additional precautions for these test methods are given in Section 5.