Information you will need about your DSL-GT Wireless ADSL Router: D- Link ADSL devices incorporate the recommendations of the ADSL Forum. Modem Dlink DSLT/T/T/GT/GT - Bootloader ADAM2 . Manuale firmware Acorp (v. manuale ) -> Download. D-Link DSL B3 User , , M. [ ], D-Link DSL Manuale Router DLink DSL-GT - , , M.

These devices are commonly referred to as microfilters or low pass filters. Select the interface for which you want to view packet statistics and the information will appear below.

Adjust the settings as desired and click the Apply button to put the new settings into effect. Page 75 To modify any previously created filter rule, click on the note pad icon in the right hand column of the Filter Dsl-g6244t for the set you want to configure. Upon restarting the Router will automatically establish the WAN connection.

Note that the device configuration settings may return to the factory d-lihk settings, so make sure you save the configuration settings with the System Settings window described above. Wireless Management The Wireless Management window located in the Advanced directory is used to control MAC address access to the wireless access point and to view a list of MAC addresses that are currently associated with the access point.

Physical and Environmental DC Inputs: The diagnostics feature executes a series of test of your system software and hardware connections. Windows Windows First, check for the IP protocol and, if necessary, install it: These numbers will have been already been established by your service provider on their network.

Configure a range of ports for forwarding. Firewall Firewall The Firewall Configuration window allows the Router to enforce specific predefined policies intended to protect against certain common types of attacks.

Index of /DOCS-TECH/DLink Router

Click the Save D-lihk button and follow the prompts to save the file. The service provider assigns a global IP address from a pool of addresses available to the service provider. Page 5 Virtual Server In order to use these advanced features it is necessary to have IP addresses available for configuration. This window is used to change the system password used to access the web manager, to save or load Router configuration settings and to restore default settings.

D-Link Support Resources

Table of Contents Add to my manuals Add. It will allow access to the wireless network to devices using the correct SSID after a negotiation process takes place. If you are satisfied that you have entered all the necessary information correctly, click the Restart button to save the new configuration settings and restart the Router. To modify any previously created filter rule, click on the note pad icon in the right hand column of the Filter List for the set mnuale want to configure.

Community Traps Filters Filter rules in the Router are put in place to allow or block specified traffic. The rules are configured for individual devices based on MAC address. Basic Router Configuration The first time you set up the Router it is recommended that you configure the WAN connection using a single computer making dwl-g624t that both the computer and the Router are not connected to the LAN. To view a specific section, Page 9 Page 10 - Information you will need about your lan After compiling the list of MAC addresses as desired, click the Apply button to enforce access control for the MAC addresses in the list.

The pre-configured rules include those listed in the table here: Your ISP has given this information to you.

Index of /DOCS-TECH/DLink Router

Filter rules can be set up for source, destination or d-lik. Security for wireless communication can be accomplished in a number of ways. Up ddsl-g624t eight PVCs dsl-g624f eight separate destinations can be created and operated simultaneously utilizing the same bandwidth. You may also save a simple text file containing the log to your computer. Under Security, click the WPA radio button. Select the specific Connection Type from the drop-down menu.

This IP address is not protected by NAT and will therefore be visible to agents on the Internet with the right type of software. Many users will find it convenient to use the default settings together with DHCP service to manage the IP settings for their private network. Comments to this Manuals Your Name. You may stop using the Setup Wizard at any time by clicking the Exit button.

Under certain circumstances, changes may be benefit performance. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Note Use the Firmware Upgrade window to load the latest firmware for the device.

This will take the chosen IP address used out of the available addresses in the dynamic IP address pool and give a permanent lease time for the IP address to the selected device. Most users will not need to change these settings. Introduction D-lini section provides a brief description of the Router, its associated technologies, and a list of Router features.

Click the Apply button to activate the new password.