View and Download Dynalink RTAW user manual online. ADSL2+ Wireless Modem Router. RTAW Wireless Router pdf manual download. or DNS settings manually encoded on your network card. PPPoE Dynalink RTA W By default the RTAW does not have wireless security setup. PPPoE connection does not require you to have an IP address or DNS settings manually encoded on your network card. PPPoE connection uses authentication .

If everything is OK, click Finish to accept these settings. To connect wirelessly to your new router please use rha1025w of the following sets of instructions: Select this item to make a connection automatically while in demand. Use of NAT Network Address Translation devices allows local hosts on such private networks to transparently access the external global Internet and enables access to selective local hosts from the outside.

For Windows NT 1. Refer to the relevant operating system to install the USB drivers. Open the Start menu, and click Run You may click Add button to add another set or click Close to exit. Select Browse my computer for driver software advanced.

Page 58 Rta025w 2: Click Off to disable this function. For Installation Use only the type of power source indicated on the marking labels.

The graphic is the one that you will see if you choose the PPPoE mode in the previous step. When returning to the Network window.

Dynalink RTA1025W User Manual

The default setting is Manual. If you set the Dynaljnk When the Command Prompt screen appears, point to the driver folder on your PC, and then enter setup -s.

Usb Driver Installation Chapter 2: To edit the setting, please click into the editing page. Select Network and Sharing Center. Update Firmware If you have to or want to ,anual the firmware for this router, you can open the Update Firmware web page and choose the correct file by pressing Browse. Press Browse to set the path for the driver file, and then press Next.

Page 34 Chapter 2: Hard reset instructions for Dynalink RTAW If your RTAW router is not working as it should, dropping connections or not being responsive, you should first do a reset of the router to see if the problems persist. Press Continue when a dialog asking for permission to continue prompts.

System Requirement and Manuak 3. The user data will be only transmitted and received among the interfaces in dynnalink group. To view the system log, you must configure system log first. System Log Chapter 4: Then, choose a protocol and define the source or destination MAC address which you want to control.

Page of Go.

When users are executing firmware upgrade and saving settings to the router, the power for the router is lost for some unknown reasons, the normal web page for the router might be damaged. If you want to change the username and the password, please modify the User Name and New Password, and then Page 26 Chapter 2: If you dunalink not know much about the router, you can use the Quick Start pages to adjust basic settings to activate your router.

Here provides the example for PPPoA. To access the Internet, private network should have mwnual agent to translate the private IP address to public IP address. To uninstall the USB driver, there are two ways to do it. In the User name field, dyna,ink the word admin.

The system will detect the USB driver automatically. Page 22 Chapter 2: Then you will see the command prompt window. Wait for Windows when copying files. Management Control — From Local You can allow local access to your router via the checked interfaces. It prevents outside users from getting direct access to a server that has company data.

Choose Add or Remove Programs.

Dynalink RTAW | Actrix

Download the Daemon from Kiwi Enterprises. Double click on the Wireless Zero Configuration service and verify that it is set to Automatic and that it is Started. Click OK to continue the backup procedure. Page 24 Chapter 2: Web Configuration Security To configure security features for the Wireless interface, please open Security item from Wireless menu.

No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of the seller. Glossary Page Page - Appendix A: