Service Manual, Elna DE Details. Elna Model DE Serger Machine Service Manual, 20 Pages. The physical copy of the instruction manual is a soft cover. Full text of “Elna Serger Instruction Manual dse de e” IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic. Hi there, Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this.

B Narrow hem Right needle only Increase both looper thread tensions slightly elha that the looper threads are firmly locked together on the edge of the fabric. Want Answer 1 Clicking this will make mabual experts see the question and we will remind you when it gets answered. Push the lever f down and hook the thread on the guide gpush the lever f up to the woking position, then pass the thread through the eye h at the far right end of the looper.

The tension settings for the rolled or narrow hem are slightly different from those of the regular 3-thread overlook. Hello Pieter, here you go: Snip the needle thread s at intervals.

A manual for elna DE - Fixya

Do not modify the plug in any way. The tension settings for the manusl overcast are different from those of 3- thread use. They are needles for domestic use and can also be used with all ordinary household sewing machines. Lubrication When using your machine for manuwl first time, or if you have not used it for some time, put a few drops of oil on the point indicated.

For very slippery fabrics, tighten the knob clockwise slightly to increase the pressure. Here’s a link to this great service Good luck! Special care is required around the sewing needle and moving blade.

A manual for elna 614DE - Elna Sewing Machines

Always replace the bulb with the same type rated 15 Watts maximum. Before you start to use your machine, please take a few minutes to study this instruction manual. Mankal the thread from the spool, as shown on the diagram, pass the thread through the guides A and B. Could you please help me? A A A Foot Pressure With the guide line a of the pressure control knob even with the top cover surface bthe foot pressure is suitable for most kinds of fabrics and rarely needs adjusting.

Place them at both ends of the spool pin base, as illustrated, to avoid thread tangling. Raise the presser foot and swing open manul lamp cover. Next pull the needle thread gently and bring manuak knots to the front of the needles. Aug 25, Elna Sewing Machines. First unplug the machine. Jan 09, Elna Sewing Machines. Refit the needle plate and the sewing foot.

Keep ventilation openings of the sewing machine and foot control free from accumulation of lint, dust and loose cloth. Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US. Posted on Aug 28, Mar 14, Sewing Machines. Push it up to the working position and thread the lower looper.

ELNA 614DE Manuals

When using the left needle tension Bluethread the left L maanual. Oct 07, Elna Sewing Machines. Turn the cutting width dial upwards to increase the width, or downwards to decrease it. Remove the screw cap and loosen the screw so that side cover can be taken off.

Open the front door and remove the side cover see page I have freestanding Series 8 dishwasher. Have a manual for Elna Sewing Machines? This helps maunal prevent sheer and lightweight fabrics from puckering. Pre-set the needle and lower looper thread tension controls at 0. The fabric is not moving it just keeps sewing in the same place. First fit the 2-thread convertor on to the upper looper see page Feb 04, Sewing Machines. For very stretchable fabrics, loosen it counter-clockwise to decrease the pressure.

How can I fix it please?

I can email for free. It may deflect the needle causing it to break.

It is important that threading is carried out in the following sequence: Oil the machine, as mentioned below under “Lubrication”. How can this be resolved.

If it is open, the machine will not work. Left needle thread - Blue thread guides Incorrect threading will result in several problems such as elnna stitches and thread breakage. Retain them for future reference.

Pass the thread through the guides A to Manua. Pay close attention when the machine is used by or hear children. Unscrew the light bulb and replace the bulb by following the same procedure in the reverse order.

Right needle thread - Red thread guides 4.