ITS Telecom Piezo Pancode IP Door Phone (Full Keypad). The ITS Telecom Piezo Pancode (Full Keypad) IP Outdoor Door Phone is a smart access control door. NOTICE. This manual describes the PANTEL/PANCODE Access. Control Door Phones system. Additional copies of this manual may be obtained from. I.T.S. This publication refers to the PANCODE IP and Pantel IP Door Access Control Additional copies of this manual may be obtained from ITS Ltd. Reproduction of.

Telecom Systems Peripherals

In the event that the product proves to be defective in workmanship or materials within a period of one year from date of shipment, ITS Ltd. They are available for outdoor installation in an aluminum unit with a piezo keypad. These units are hardwired and powered by an external 12V AC transformer, included pnacode the package.

This mounting bracket should be installed as shown in Figure Installation Bracket To install the wall bracket: The unit powers the door lock, provided it is powered by an external supply and not PoE. This will crimp the wire connection.

The initialization completion is indicated by short busy signal. Customer takes the full responsibility on the video camera functionality in case when the third part external video camera will be used with the door units. Application adds new server account in the left side of the table. The key difference between these two installations pancodd which access-control device controls the door lock relay.

This process can be implemented after the unit has been installed on the wall, since it requires the connection of an Ethernet cable to the local network.

Optionally possible to establish connection between PC and Pancode by using the cross- linked Ethernet cable. It appears on the label attached to the rear panel of the device.

To find a device panncode the network: Insert the installation CD and copy the scan.

Pancode - Piezo Keypad — Logitel

Application Interface The navigation menu contains the following items: Contains the unit authorization on the SIP proxy server. In special cases it is required to enter Company Domain IP address. Speed-dialing — sets the Pancode VoIP to speed-dialing operation mode.

In this mode, it is possible to make a call using a two-digit speed dial code 11 to 35 to internal or external subscribers. Displays the IP Door panel internal hardware edition number. Pancode VoIP has two dialing modes: Pantel VoIP has the standard mode only.

Telecom Systems Peripherals

The VoIP Dialing screen contains the following areas You can enter up to eight prefix prefixes using a coma separator. Ist firmware upgrading procedure requires TFTP client software, such as “tftpd32” software.

Tftpd32 Application Screen h.

Wait for beep signal, which indicates that device restart process is complete. This may take a few minutes. Restore the connection session with the IP Door unit.

Its Telecom - Pancode Analogue

Page of 48 Go. Pancoode ersion 2 Release 11 ed2. Access Contr ol Door Phones. Table of Contents Add to my manuals Add. Page 2 In the event that the product proves to be defective in workmanship or materials within a period of one year from date of shipment, ITS Ltd.

Page 13 This will crimp the wire connection. This manual also for: Comments to this Manuals Your Name. Enter text from picture: By pressing ‘print’ button you will print only current page.

To print the manual completely, please, download it. Don’t show me this message again. Got it, continue to print. Don’t have an account?