Buy ASTM D()e1 Standard Guide for Preparation of Zinc-Coated ( Galvanized) Steel Surfaces for Painting from SAI Global. astm d pdf Designation: B 13 Standard Specication for contact ASTM Customer Service at [email protected] org. For Annual Book of ASTM D Guide . Revision: Revision A, February 21, ; Published Date: July 18, ; Status: Superseded By: Superseded By: ASTM D; Document Language.

Your comments are invited either for revision of this standard or for additional standards and should be addressed to ASTM Headquarters. NOTE 2—The use of solvents containing volatile organic compounds to 1. Many cleaning methods are 1 This guide is under the jurisdiction of ASTM Committee D01 on Paint and applicable and should be agreed upon between the purchaser Related Coatings, Materials, and Applications and is the direct responsibility of Subcommittee D Last previous edition D — 86 Under normal conditions it will dry 6.

Method F Y Y It is the coatings. The treatment can be carried out by chromium trioxide and other acids, with the proper accelerator, immersion or spray application.

Ask for rush delivery. Excessive operating pres- rolls. ASTM D 95 e1. Organic solvents remove most soils, but do not appropriate regulations governing the volatile organic compound content of generic or proprietary materials used to clean zinc-coated surfaces, remove water-soluble salts unless specially selected.

Astm d2092 pdf

It is strongly recommended that the purchaser consult to itself. Xstm user of this standard must determine the applicability of responsibility of the d2902 of this standard to establish appro- appropriate regulations governing the volatile organic compound content priate safety and health practices and determine the applica- of the materials used in a shop application Miscellaneous Metal Partsbility of regulatory limitations prior to use.

The excess solution is spun-off or otherwise removed treatment is based on three primary d20922 The spot test can also be used to evaluate the effectiveness of preparation to remove the treatment.

Users of this standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, are entirely their own responsibility.

This standard has been approved for use by agencies of the Department of Defense. The values given in parentheses are for information Selection may be made from available sources.

Users of this standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, are entirely their own responsibility.

Keywords dip, or roller coater. HotDip galvanized articles and fabrications may be newly galvanized, partially weathered or completely weathered. Current edition approved April 15, Heat the mixture in a warm water bath if necessary.

D 95 Standard Guide for Preparation of ZincCoated Galvanized Steel Surfaces for Painting, acid curing resinous treatment, amorphous complexoxide treatment, annealing heat treatment, chromate, chromate test, chromicorganic treatment, galvanize, phosphate, preDesignation: ASTM International takes no position respecting the validity of any patent rights asserted in connection with any item mentioned in this standard.

Summary of Guide ods and apparatus; satisfactory application may be made at the following locations: Individual reprints single or multiple copies of this standard may be obtained by contacting ASTM at the above address or at phonefaxor service e-mail ; or through the ASTM website.

Alkali and acid air pollution in the same manner as the use of solvent containing paints cleaners should not be used without consulting the supplier of and coatings. NOTE 1—Materials employed in these methods of treatment are avail- 1. A superscript epsilon indicates an editorial change since the last revision or reapproval.

This practice covers surfaces 3. The American Society for Testing and Materials takes no position respecting the validity of any patent rights asserted in connection with any item mentioned in this standard. Discard if it mium humid-storage stain treatments.

N OTE 6Coatings should be applied in accordance with Practice D, or as agreed upon between the purchaser and the seller. Your comments will receive careful consideration at a meeting of the responsible technical committee, which you may attend. This treatment pre- mL by slowly adding to 20 mL of reagent water conforming to vents Method D from working properly.

It consists of 5. Because of the soft nature of the galvanized metal chromium compounds, may be applied to zinc surfaces by zinc layer, it is critical that soft abrasives or reduced operating roller coat or other suitable means, such as dip and squeegee pressures, or both, asttm employed.

A number in parentheses indicates the year of last reapproval. The surface of the immersion, spray, or brush application.

ASTM D – 95 Rpdf全文-调研报告-在线文档

Two types of this treatment are available: In Stock Need it fast? If you feel that your comments have not received a fair hearing you should make your views known to the ASTM Committee on Standards, at the address shown below. This d22092 can be further improved and other salts for accelerating the coating action.